UGREEN 150W 4-Port GaN Fast Car Charger (EC706 / UG-35571)

UGREEN 150W 4-Port GaN Fast Car Charger is a high-power, multi-device charging hub for vehicles that need to keep phones, tablets, and even power-hungry laptops topped up on the move. Featuring three USB-C ports (with USB-C2 supporting PD 3.1 up to 140W EPR) plus a legacy USB-A fast-charge port (up to 22.5W SCP/QC), it intelligently shares up to 150W total across connected devices, runs cooler and smaller thanks to GaN technology, and supports both 12V and 24V vehicle systems. A convenient extension cable / rear clip setup helps reach back-seat passengers, and built-in protections guard against over-current, over-voltage, overheating, and short circuits—making it a reliable pro-grade charging upgrade for personal cars, rideshare fleets, and road warriors.

Product Features

150W high-output multi-device charging

Delivers up to 150W total shared output across four ports so you can fast charge multiple high-draw devices at once—phones, tablets, game consoles, power banks, and laptops—without constantly swapping cables.

PD 3.1 140W laptop-class power on USB-C2

The primary USB-C2 port supports USB Power Delivery 3.1 Extended Power Range up to 140W (including 28V/5A), enabling rapid charging for large laptops such as MacBook Pro 16 (0–50% in about 30 minutes when conditions are met) and other USB-C notebooks that accept high-wattage input. Use an EPR-rated 5A USB-C cable for best performance.

Triple USB-C plus legacy fast USB-A flexibility

In addition to the 140W-capable USB-C2, two supplemental USB-C ports each support fast charging up to 30W (protocol-dependent), while the USB-A port supports up to 22.5W (SCP/QC) for older or accessories devices—so everyone in the vehicle can plug in with what they have.

Advanced GaN power electronics for cooler, smaller charging

GaN (gallium nitride) components improve efficiency, reduce heat, and allow a more compact form factor compared to traditional silicon-based car chargers—important in confined automotive interiors and during multi-device fast charging.

Intelligent power distribution & broad fast-charge protocol support

Designed to negotiate appropriate voltage/current per connected device, supporting modern fast-charge standards such as PD (including PD 3.1), PPS, QC, and vendor-specific fast modes (e.g., SCP) to optimize speed while protecting device batteries.

Built-in multi-protection safety suite

Integrated safeguards defend against over-current, over-voltage, overheating, and short circuits; fire-retardant housing materials add an extra layer of in-vehicle safety for continuous, high-load charging sessions.

12V / 24V vehicle compatibility with fuse guidance

Works in cars, SUVs, and trucks using 12V or 24V accessory sockets. To reliably draw full 150W output, UGREEN recommends using a circuit / fuse rated at 20A or higher to avoid blowing the vehicle fuse under peak load.

Passenger-friendly cable and rear-clip convenience

Package includes an extended cable (approx. 1 m / 3.3 ft, length may vary by region) and a rear clip so you can mount the charger where back-seat riders can easily access the extra ports—great for families, carpools, and rideshares.

Product Specifications

• Model: EC706 / UG-35571.
• Total output power: Up to 150W shared across all ports.
• Input (vehicle): DC 12V–24V (recommend 20A fuse for full 150W capability).
• USB-C2 (primary high-power): Up to 140W PD 3.1 (supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A profiles).
• USB-C1: Up to 30W fast charging (voltage steps include 5V/3A, 9V/3A, 12V/2.5A; protocol-dependent).
• USB-C3: Up to 30W fast charging (similar ranges to USB-C1; region/packaging spec may vary).
• USB-A: Up to 22.5W (supports fast-charge modes incl. SCP/QC; 5V/3A, 9V/2A, 12V/1.5A typical).
• Supported fast-charge protocols: PD (incl. PD 3.1), PPS, QC, SCP (Huawei SuperCharge class), and more device-negotiated modes.
• Included cable: Approx. 1 m (3.3 ft) USB-C charging cable for convenient in-vehicle reach (length may vary by region / bundle).
• Construction: Compact GaN-based design with durable, heat-resistant / fire-retardant housing materials suitable for automotive environments.
• Compatibility examples: iPhone 16/15/14/13 series, Samsung Galaxy S24/S23/S22 series, Google Pixel 9/8, iPad, MacBook Pro, and other USB-C laptops & mobile devices (legacy USB-A supported).