Magnizon 1-Ph, 230V, 50/60Hz, 6KVA/48VDC Combined Inverter/Charger with Pure Sine Wave (HG6048SW-LCD)

Magnizon HG6048SW-LCD is a 6KVA 48VDC combined inverter and battery charger designed to provide reliable backup and alternative power for homes, offices, businesses, telecommunications installations, and other critical electrical applications. It converts 48V DC battery power into clean 230V AC pure sine wave power and can also operate from utility or generator input. With a 6KVA continuous output, LCD display, microprocessor-controlled charging, selectable battery charging settings, and seamless transfer switching, this Magnizon inverter charger is suitable for backup, off-grid, and hybrid energy systems. The pure sine wave output makes it suitable for sensitive electronics as well as equipment with higher starting currents, including computers, refrigerators, pumps, motors, compressors, printers, and other electrical appliances.

Product Features

6KVA Continuous Power Output

The HG6048SW-LCD delivers up to 6KVA or 6000W of continuous AC output power, providing sufficient capacity for a wide range of residential, commercial, office, and critical power applications. The inverter is designed to handle loads that require reliable continuous power while also supporting higher starting demands.

Pure Sine Wave Output

The inverter produces a pure sine wave AC output suitable for sensitive electronic equipment and electrical appliances. This makes it appropriate for computers, networking equipment, printers, televisions, refrigerators, pumps, motors, compressors, power tools, and battery chargers.

48V DC Battery System

The HG6048SW-LCD operates from a 48V DC battery bank. A 48V architecture is suitable for higher-power backup systems because it allows the required DC current to be lower than comparable 12V or 24V systems.

Combined Inverter and Charger

The unit combines an inverter and battery charger in one system, reducing the need for separate equipment. It can convert stored battery energy into AC power while also charging the connected battery bank from an AC utility or generator supply.

Intelligent Battery Charging

A microprocessor-controlled charging system manages the battery charging process and allows charging parameters to be configured for different battery types. The system supports progressive multi-stage charging to help maintain the connected battery bank.

LCD Display

The integrated LCD display provides access to important operating information and settings, making it easier to monitor the inverter, battery, input, output, and charging status.

Utility and Generator Compatibility

The inverter can accept AC power from utility or generator sources. This allows it to be integrated into backup power systems where grid power and a generator are available alongside battery storage.

Fast Transfer Switching

The HG6048SW-LCD is designed with automatic transfer switching for backup applications. The transfer time is typically around 10 milliseconds, helping reduce interruptions when switching between the available power sources.

High Surge Capacity

The inverter is designed to accommodate equipment with higher starting or surge requirements. This makes it suitable for applications involving motors, pumps, compressors, refrigerators, and other loads that may draw significantly higher current during startup.

Multiple Battery Type Support

The charging system can be configured for different battery technologies and charging requirements, including VRLA, GEL, deep-cycle and other compatible battery types. This provides flexibility when designing a 48V battery backup system.

Solar and Hybrid System Compatibility

The HG6048SW-LCD can be incorporated into alternative energy systems alongside solar or wind generation equipment. For installations requiring an integrated MPPT solar charge controller, a dedicated Magnizon HSP or APS-M series model may be more appropriate.

Protection and Power Management

The inverter incorporates protection functions designed to safeguard the system against conditions such as low battery voltage, overcharging, overload, short circuit and other operating faults.

Product Specifications

• Brand: Magnizon
• Model: HG6048SW-LCD
• Product Type: Combined inverter and battery charger
• Rated Capacity: 6KVA
• Rated Output Power: 6000W
• Input Phase: Single phase
• AC Input Voltage: 230V AC
• AC Input Frequency: 50/60Hz
• DC Battery Voltage: 48V DC
• Output Voltage: 230V AC
• Output Frequency: 50Hz/60Hz
• Output Waveform: Pure sine wave
• Output Power Factor: Up to 1.0
• Continuous Output: 6000VA / 6000W
• Peak/Surge Capacity: Up to 18,000VA
• Nominal Efficiency: More than 88%
• Line Transfer Efficiency: Approximately 95%
• Typical Transfer Time: Approximately 10ms
• Low Battery Alarm: Approximately 42V DC
• Low Battery Shutdown: Approximately 40V DC
• High Battery Voltage Alarm: Approximately 64V DC
• AC Charging Current: Up to 50A
• AC Input Voltage Range for Charging: Approximately 164V to 253V AC
• Battery Charging: 4-stage digital-controlled progressive charging
• Battery Compatibility: VRLA, GEL, deep-cycle, Ni-Cd and other compatible battery technologies
• Display: Integrated LCD display
• Power Saver: Available
• Output Protection: Overload and short-circuit protection
• Battery Protection: Low-voltage and overcharge protection
• Cooling: Forced-air cooling
• Installation: Suitable for backup, off-grid and hybrid power systems
• Applications: Homes, offices, IT equipment, telecom systems, ATMs, remote sites, commercial facilities, medical equipment and critical loads

Solar Compatibility: Can be integrated into solar/wind hybrid systems; external solar charge controller may be required depending on system design.